How to install a 48 inch pivot shower door?

Installing Your 48-Inch BLUE-SKY Pivot Shower Door: A Comprehensive Guide

If you're planning to install a 48-inch pivot shower door by BLUE-SKY, you're in the right place. This guide provides a detailed, step-by-step process to ensure a successful installation.

Tools and Materials Required

• Drill
• Level
• Measuring tape
• Screwdriver
• Silicone sealant
• Safety glasses
• Hammer

Preparation Steps

Before you begin installing the shower door, ensure that the shower area is clean and dry. Measure the opening of the shower to confirm it matches the door's specifications. Clear the workspace and wear safety glasses to protect your eyes.

Step-by-Step Installation

1. Frame Installation:
   • Position the bottom track on the shower base and mark the drilling points with a pencil.
   • Drill holes into these marked points. Insert wall anchors if necessary.
   • Attach the bottom track using screws, ensuring it is level.
2. Wall Jambs Installation:
   • Place the wall jambs against the walls, aligning them with the bottom track.
   • Mark the drill points through the pre-drilled holes in the wall jambs.
   • Drill the marked spots, insert anchors, and secure the wall jambs with screws.
3. Door Attachment:
   • Attach the pivot brackets to the top and bottom of the door panel.
   • Lift the door and carefully insert the pivot brackets into the corresponding slots on the wall jambs.
   • Adjust the door to ensure it hangs perfectly vertical using the level.
4. Fasten and Secure:
   • Tighten all screws to secure the door in place, checking alignment regularly.
   • If necessary, adjust the door settings to ensure smooth operation.
5. Seal the Edges:
   • Apply a thin bead of silicone sealant along the edges of the tracks and wall jambs to prevent water leakage.
   • Allow the sealant to cure according to the manufacturer's instructions.

Final Checks and Maintenance Tips

Once the installation is complete, conduct a final check to ensure that the door opens and closes smoothly without any obstructions. Regularly clean the glass with a non-abrasive cleaner and inspect the hardware to maintain the integrity and aesthetics of your BLUE-SKY shower door.

Conclusion

Installing a 48-inch BLUE-SKY pivot shower door can be a rewarding DIY project. By following these detailed instructions, you can enhance your bathroom with a sleek and functional shower door that stands the test of time.